Perhaps the most important part of a bandsaw is the blade that does the cutting. You want to keep it protected so it lasts for as long as possible, and with these protocols, you can achieve this without having to struggle.

Keep Blade Aligned Properly

So that your bandsaw's blade isn't put through a lot of wear and tear, it needs to be properly aligned at all times. Then you'll get efficient and precise cuts on a regular basis, thus keeping this component well-protected over the years.

To keep your bandsaw blade aligned, you'll need to inspect certain components on a frequent basis. They include the bearings, guides and tensioners. Check on these components as often as you can to make sure they're in good condition and keep your bandsaw blade in a position that yields optimal cuts on a long-term basis.

Loosen the Blade Tension After Prolonged Cutting

There may be some projects where you need to use your bandsaw for an extended period of time. That's going to eventually tighten up the tension. You don't want to continue using the blade this way because you're putting extra force and pressure on it.

What you'll want to do instead is loosen the blade tension after prolonged cutting. That can reduce stress and help you get more out of each bandsaw blade that's set up on this cutting equipment. You don't have to loosen tension dramatically either. A couple of minor tweaks may suffice for optimal blade longevity.

Clean Blade Consistently

You probably will have debris and gunk collected on your bandsaw's blade after using this machine for a while. You don't want to let these things remain because they can ultimately affect cutting performance and even the condition of your blades. As such, take your time cleaning the blade consistently.

You should ideally do this after using the bandsaw each time. Just make sure you use the approved cleaners in order to save yourself a difficult cleaning task, as well as not damage the bandsaw blade in any way. There should be specific cleaners for your bandsaw's particular make and model. 

If you have a bandsaw, you need to make sure you take proper steps of keeping the blade in good condition. Then you won't have to deal with a long downtime with this machinery or have your cutting results affected. Rather, you'll get great cutting results and save yourself blade replacement costs.

Contact a supplier of products like Lenox bandsaw blades to get more tips.

Share